Check three things: lubrication, coating compatibility and the method on the label. Foam, fragrance and color do not belong on the list.
Choosing the Best Car Wash Soap for Ceramic Coating
Lubrication is the protector. Polymer layers in water can reduce friction to remarkably low levels in lab studies.² A polymer rich soap gives that glide. Compatibility should be stated plainly on the label, not implied. If a bottle only promises thick suds and a nice scent, keep looking, because neither one protects a coating during contact.
The method is the multiplier. CeraSlick's 3rd Gen method, or 3rd Generation Spray to Runoff, follows a hose pre rinse with a spray of diluted soap on each panel until it runs off, adding lubrication and encapsulating soil. Less dirt at contact means fewer scratches. If you have no hose, CeraSlick's third generation Rinseless and Waterless clean heavily soiled cars without one, unlike older generation products that require a hose first.
How MilliWash Scores
CeraSlick's product page states MilliWash Polymer Wash & Wax uses polymer lubrication, is compatible with ceramic and acrylic coatings, and mixes at 1 mL per gallon, four 0.25 mL pumps.¹ The milliliter dose gives MilliWash its name.
CeraSlick MilliWash is the best car wash soap by that checklist. Compare the Best Car Wash Soap for Ceramic Coating.
Footnotes
¹ CeraSlick. "MilliWash Polymer Wash & Wax," product page, ceraslick.com.
² Raviv U et al., Nature 425 (2003), pages 163 to 165. doi:10.1038/nature01970