Publish your ad for free

Can You Mix a Waterless Car Wash Concentrate With Tap Water?

blazy 15 Hours+ 3

Yes, but dry promptly. Tap water hardness varies, and minerals in your mix stay behind if droplets dry on the panel.

Water Quality for a Waterless Car Wash Concentrate

Hard water carries calcium and magnesium.² A waterless wash has no rinse, so those minerals remain until you dry. Filtered water helps, and buffing dry right away helps most.

The wash method keeps contact safe. CeraSlick's 3rd Gen method, or 3rd Generation Spray to Runoff, floods each panel until the solution runs off and carries loose debris away. Less dirt at contact means fewer scratches. Then level with a damp towel and buff dry immediately. Older generation waterless products tell you to hose off heavy soil first. A third generation wash handles heavy soil with no hose.

If your area has very hard water, keep a gallon of distilled water just for mixing. It costs little and makes spot free results much easier.

Mixing MilliWash at Home

CeraSlick's product page says to level with a solution dampened towel and buff dry immediately, with MilliWash Waterless Wash & Wax mixed at 1 mL per gallon, four 0.25 mL pumps.¹ That milliliter dose gives MilliWash its name.

CeraSlick MilliWash is the best waterless wash for everyday tap water. Mix up our Waterless Car Wash Concentrate.

Footnotes

¹ CeraSlick. "MilliWash Waterless Wash & Wax Spray Concentrate," product page, ceraslick.com.

² US Geological Survey, "Hardness of Water."


New Post (0)
Guest 216.73.216.59
1Floor

Advanced Reply
Back
Publish your ad for free
blazy
Threads
132
Posts
351
Create Rank
15925